The Caséta Fan Speed Control allows Caséta users the ability to control their fan from a Pico Remote, as well as from their Caséta System from anywhere in the world.
- Favorite button for preset fan speed
- Provides 4 quiet fan speeds plus off for a single ceiling fan
- Pico Remote for multi-location applications (PJ2-3BRL-Gxx-F01) with 10 year battery life
- Kick-start feature turns fan to HIGH before going to selected speed
- For use with paddle-type ceiling fans only - not for use with fans that have integrated fan speed and/or light control modules, DC motor fans, fans with remote controls, bathroom or kitchen exhaust type fans.
- 1.5A maximum -120V
- 0.1A minimum load
- AC motors only
- Requires a neutral wire
- 1 PD-FSQN requires 2 in (63 mm) minimum depth wallbox
- Single-pole only - for multi-location applications the Fan Pico (PJ2-3BRL-Gxx-F01) can be installed using the Pico Wallbox Adapter Bracket
- FASS Tab available to pull out to service or clean the fan - to restore power push FASS back in completely.
- Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
- Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low Voltage AC Power Circuits.
- Load controls always operate locally and do not require system control.
- Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored.
- PD-5WS-DV, PD-5ANS, PD-6ANS, and PD-10NXD use conventional 3-way wiring.
- Uses Lutron Claro wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately.
- Lutron Claro wallplates snap on with no visible means of attachment.
- Requires a 1-gang U.S. wallbox. 31/2 in (89 mm) depth recommended, 21/4 in (57 mm) depth minimum.
- Green status LED(s) to indicate load status.
- PD-FSQN provides 4 quiet fan speeds plus OFF for a single ceiling fan.