Pluggable interface relays are used for digital signals. They are used for electrical isolation, amplification and signal matching between the electronic controlling, e.g. PLC (programmable logic controller), PC or field bus systems and the sensor/actu ator level. In contrast to electronic switching devices, pluggable interface relays don’t use additional internal protective circuits and thus are overload-proof against short-time variations like current or voltage peaks.
Applications
For Electrical Isolation, Amplification And Signal Matching Between The Electronic Controlling, E.G. PLC (Programmable Logic Controller), PC Or Field Bus Systems And The Sensor/Actuator Level
Features
- Cadmium-free contact material
- Width on socket: 27 mm
- Suited for logical or standard sockets
- Mechanical status indication
- Integrated test button for manual actuation and locking of the output contacts (blue = DC, orange = AC)
- Pluggable function modules: Reverse polarity protection/free wheeling diode, LED indication, RC element, overvoltage protection, time modules, logical or standard sockets
Specification Description
Coil: 12 V DC
Contact Configuration: 2 C/O (SPDT)
Contact Rating: 250 V, 10 A
Mounting: On Socket
Enclosure: IP40
Resistance: Contact: Less Than Or Equal To 100 mOhm, Coil: 110 Ohm At 20 deg C
Operating Cycles: Mechanical: Greater Than 20000000 Cyc Electrical: Greater Than 100000 Cycles
Operating Temperature: -40 To +70 deg C
Environmental Conditions: Storage Temperature: -40 To 85 deg C
Maximum Switching Voltage: 250 V DC
Switching Current: 5 mA Minimum
Operating Current: DC-12 (Resistive): A At 24 V, DC-13 (Inductive): 2 A At 24 V
Rated Power: 1.5 W
Contact Material: AgNi
Make Voltage: 9.6 V DC At 20 deg C
Release Time: 7 msec
Response Time: 18 msec
Insulation Class: C250
Operating Voltage: 250 V
Insulation Voltage: 250 V AC
Output: 11-12/14, 31-32/34