The Shelly Qubino Wave 1 PM UL is a compact ZWave 800 smart home module with power metering that can be used to control and monitor connected devices like lights, locks, gates, garage doors, irrigation systems and more.
As a ZWave 800 series device, this module works with the newest 800 series as well as 700, 500 and older Zwave certified hubs, systems and software
The Shelly Wave 1 PM UL also has a local input that can be used to provide local push button switch or dry contact input triggers in addition to being controlled via ZWave.
Shelly's Wave 1 PM UL can be powered by 110V, 12VDC or 24-48VDC and the isolated relay output can be used as a dry contact closure, or can switch up to 30VDC or 120V.
Monitor connected circuits for precise information about power consumption, consumption patterns, phantom power draws, and more—remote connection and real-time/historical usage logging provides end-users and installers simple and effective energy-saving optimizations.
Note: We recommend using Wave 1 on low amperage devices and connecting to a 'contactor' when used with higher loads. An RC Snubber is needed for inductive loads. Installation with high voltage loads should be performed by a licensed electrician.
Shelly Qubino Wave 1 PM UL Features & Specs:
- ZWave 800 series, compatible with previous ZWave generations
- Powered by 12VDC, 24-38VDC or 110-240VAC
- cUL listed
- Load rated up to 30V /10A or up to 240V/15A
- Recommend using a contactor to drive larger high voltage loads
- Power monitoring provides live and historic energy consumption data, charts, and logs via the Shelly app
- Supports resistive, capacitive and inductive loads
- Inductive loads require an RC Snubber
- Dimensions: ~37 x 42 x 16 mm / 1.46 x 1.65 x 0.63 inches
- Rated for Indoor Use
- -20 to -40C / -5 to 105F operating temperature
- ZWave S800 980.4 MHZ for North America